User manual
4-3. WORKING WITH THE EIKOS LE
Operating modes
The Eikos LE offers 2 modes to work from: the Mixer Mode, which is the Eikos LE default mode and
the Matrix Mode, which turns your Eikos LE into a true 12 x 2 scaled matrix with numerous effects
and PIPs and logos.
Reseting default values
It is strongly recommended resetting all of the default values of your Eikos LE unit before setting
up your shows and events. To do so, press the EXIT/MENU button and select Control in the menu
by rotating the corresponding knob. Then press the ENTER button to enter the Control sub-menu.
Select Default Values by rotating the scroll knob, and press the ENTER button to enter your choice to
restart your Eikos LE with its factory settings. This operation should take approximately 30 seconds.
* NOTE * : In Mixer Mode, the Eikos LE will only let you work on
your preview screen (direct access to main screen is locked).
To choose which mode the Eikos LE will work in, press the
EXIT/MENU button and select Mode in the menu by rotating the
scroll knob. Then press the ENTER button to enter the Mode
sub-menu. Select the desired mode by rotating the scroll knob,
and press the ENTER button to conrm your choice. Press the
EXIT/MENU button to return to the main menu.
33