Manual
4-3. WORKING WITH THE EIKOS
Operating modes
The Eikos offers 3 modes to work from: the Mixer Mode, which is the Eikos default mode, the Matrix Mode,
which turns your Eikos into a true 12 x 2 scaled matrix with numerous effects and PIPs and logos, and
Quadravision Mode which displays 4 layers.
* NOTE * : In Mixer Mode, the Eikos will only let you work on your
preview screen (direct access to main screen is locked).
To choose which mode the Eikos will work in, press the EXIT/MENU
button and select Mode in the menu by rotating the scroll knob. Then
press the ENTER button to enter the Mode sub-menu. Select the
desired mode by rotating the scroll knob, and press the ENTER button
to conrm your choice. Press the EXIT/MENU button to return to the
main menu.
Reseting default values
It is strongly recommended resetting all of the default values of your Eikos unit before setting up your
shows and events. To do so, press the EXIT/MENU button and select Control in the menu by rotating the
corresponding knob. Then press the ENTER button to enter the Control sub-menu. Select Default Values by
rotating the scroll knob, and press the ENTER button to enter your choice to restart your Eikos with its factory
settings. This operation should take approximately 30 seconds.
32