Manual

Eikos - Ref. EKS500
Rear Panel Description
VIDEO OUT
AUDIO INPUT
AUDIO OUTPUT
RS-232 communication port on a
DB9 female connector or TCP/IP
on RJ45 connector
Power supply: IEC/EN/UL/CSA 60950-1,
internal, autoswitchable
Universal Analog Computer/TV/HDTV inputs
SD-SDI/HD-SDI inputs #1 to #4: female BNC
DVI inputs #1 & #2: female DVI-I (digital pins)
and #5 & #6: analog inputs on DVI-A
Outputs #1 (Main) & #2 (Preview): female
HD15, DVI-I (analog pins)
Connectors:
1x BNC-F: SD/HD-SDI (with audio embedded)
3x BNC-F: Y_Cb_Cr
1x Mini Din 4: S. Video
1x BNC-F: Composite video PAL/NTSC
Balanced or unbalanced
mono/stereo Outputs (all pin
MCO mode connector)
IP-LAN connector
Balanced or unbalanced mono/stereo inputs
(all pin MCO male connectors)
O P E R AT I O N S O V E R V I E W
WORKING IN MIXER MODE
1- Select an input.
2- On the preview screen, the input appears
3- Select an EFFECT (open/close)
4- Press TAKE to view the result on the Main screen
WORKING WITH PIPs IN MIXER MODE
1- Press the PIP2 button. On the preview screen, the PIP (layer) appears as a
color rectangle
2- Select an input. On the preview screen, the input appears in the layer rectangle
3- Adjust the PIP (layer) with ADJUSTMENT button (Pos & Size or Zoom)
4- Select a transition (open/close) or an effect into Layer menu [Home menu]
5- Press TAKE to view the result on the main screen
6- To remove layer, press BLACK then TAKE
7- For another PIP setup, repeat from step #1
A UD I O I NP U T / OU T P U T C O N N EC T I O N S
L+
L-
R+
R-
UNBALANCED
Left
Right
GROUND
L+
L-
R+
R-
BALANCED
L+
R+
L-
R-
GROUND(S)
H O M E M E N U
- MODE: select to choose which mode the Eikos will work in (Mixer or Matrix or Quadravision Mode)
- INPUT: select to congure the 12 individual input types and resolutions
- MAIN OUT: in Mixer or Quadravision mode, select to set the output types and resolutions of the Main output
- OUTPUT 1: in Matrix mode, select to set the output types and resolutions of Output #1
- PREVIEW OUT: in Mixer mode, select to set the output types and resolutions of the Preview output
- OUTPUT 2: in Matrix mode, select to set the output types and resolutions of Output #2
- VIDEO OUT: select to congure Video output card settings
- PREDEFINED LAYOUT: select a layout for the Quadravision Mode
- PRESET: select to store and use presets
- IMAGE: select to change source image settings of an input
- KEYING/TITLING: select to access keying and titling controls and parameters when video layer is
selected
- LAYER: select to adjust layer size, position, border, transparency or transitions
- LOGOS/FRAMES: select to store (record), use and manage logos and frames into the Eikos
- AUDIO: select to access all audio input and output parameters
- OSD SETTINGS: select to display OSD
- CONTROL: select to access device software information, LAN settings, reset factory settings,
amongst other user oriented functions (see next page)
- VIRTUAL T-Bar: select to access the Virtual T-Bar
MCO male connectors
Inputs #1 to #6: Balanced & unbalanced connection
Inputs DVI #1 to DVI #2: Balanced & unbalanced connection
Input AUX: Balanced & unbalanced connection
Outputs #1 to #2: Balanced & unbalanced connection