User guide

3- TIPS

• Front panel Di-VentiX II status:

«Due to HDCP content, non-HDCP screens cannot display protected sources»

This message is displayed on the menu when a input content (HDCP sources) is detected and when not all

of the DVI output screens are HDCP.

For example, a DVI output not connected to a screen, this is considered as a non HDCP screen.

• How to have a non HDCP Di-VentiX II:

When it is known that non protected content will be displayed, the user can disable the output HDCP detec-

tion with the front panel menu or control command (version 5.00 minimum).

• To avoidHDCP cabling problems, when quality allows it, prefer an analog YUV input signal.

• DVI plugs must be used to have a good electrical contact.

WARNING: DVI cables are fragile and must not be bent or folded.