User’s Manual BROAD SCAN HD MODEL: BHD930-AG & BHD930-DG BROAD SCAN SDI MODEL: BSD830-AG & BSD830-DG BROAD SCAN MODEL: BSC730 ANALOG WAY® BROAD SCAN (HD/SDI) – AW 5002 EDITION : 07 / 07
BROAD SCAN (HD/SDI) ENGLISH SAFETY INSTRUCTIONS All of the safety and operating instructions should be read before the product is operated and should be retained for further reference. Please follow all of the warnings on this product and its operating instructions. CAUTION: WARNING: To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or intense heat sources (such as heaters or direct sunlight).
BROAD SCAN (HD/SDI) INSTRUCTIONS DE SÉCURITÉ Afin de mieux comprendre le fonctionnement de cet appareil nous vous conseillons de bien lire toutes les consignes de sécurité et de fonctionnement de l’appareil avant utilisation. Conserver les instructions de sécurité et de fonctionnement afin de pouvoir les consulter ultérieurement. Respecter toutes les consignes marquées dans la documentation, sur le produit et sur ce document.
BROAD SCAN (HD/SDI) SICHERHEITSHINWEISE Um den Betrieb dieses Geräts zu verstehen, raten wir Ihnen vor der Inbetriebnahme alle Sicherheits- und Betriebsanweisungen genau zu lesen. Diese Sicherheits- und Betriebsanweisungen für einen späteren Gebrauch sicher aufbewahren. Alle in den Unterlagen, an dem Gerät und hier angegebenen Sicherheitsanweisungen einhalten.
BROAD SCAN (HD/SDI) TABLE OF CONTENTS SAFETY INSTRUCTIONS ........................................................................................................................................................... 2 QUICK START GUIDE – BROAD SCAN (HD/SDI) .................................................................................................................. 6 Chapter 1 : INTRODUCTION .................................................................................................................
QUICK START GUIDE – BROAD SCAN (HD/SDI) ANALOG WAY EDITION : 07/07 CONNECTIONS: Turn OFF all of your equipment before connecting. Connect the AC power supply cord to the BROAD SCAN and to an AC power outlet. Connect your computer sources to the COMPUTER INPUT (HD15) connector or the DVI-D INPUT connector. As required, connect a control monitor on the MONITOR OUT (HD15 or DVI-D) connector. NOTE: The analog (RGB) MONITOR OUT is available only if the COMPUTER source is analog.
BROAD SCAN (HD/SDI) BROAD SCAN (HD/SDI) Chapter 1 : INTRODUCTION 1-1. ACCESSORIES SUPPLIED • 1 BROAD SCAN or BROAD SCAN SDI or BROAD SCAN HD • 1 AC mains cable. • 1 CD-ROM (Remote Control Software). • 1 User’s Manual. 1-2. BROAD SCAN HD GENERAL INFORMATION Broad Scan HD by Analog Way is a Broadcast and Professional Computer to Video and High Definition TV Scan Converter.
Chapter 1 : INTRODUCTION (continued) BROAD SCAN (HD/SDI) 1-3. BROAD SCAN SDI INFORMATION Broad Scan SDI by Analog Way is a Broadcast and Professional Computer to Video Scan Converter. Fitted with Digital DVI and Analog RGB input, it converts Workstation, PC or Mac graphic images up to1600x1200 @ 60Hz (1920x1200 RB) into NTSC or PAL Video. Each Computer input has its own monitor loopthrough output for the connection of a control display.
BROAD SCAN (HD/SDI) Chapter 1 : INTRODUCTION (continued) 1-4. BROAD SCAN INFORMATION Broad Scan by Analog Way is a Broadcast and Professional Computer to Video Scan Converter. Fitted with Digital DVI and Analog RGB input, it converts Workstation, PC or Mac graphic images up to1600x1200 @ 60Hz (1920x1200 RB) into NTSC or PAL video. Each computer input has its own monitor loop through output for the connection of a control display.
Chapter 1 : INTRODUCTION (continued) BROAD SCAN (HD/SDI) 1-7. BROAD SCAN HD (BHD930) & BROAD SCAN SDI (BSD830) FRONT PANEL DESCRIPTION • BROAD SCAN HD Broad ScanHD ANALOGWAY R • BROAD SCAN SDI Broad ScanSDI ANALOGWAY R ON / OFF: Switch ON or OFF the device (Long push). FRAME: Frame selection. Display the stored frame onto the output. FREEZE: Freezes the displayed output. UNDER/OVER: Image mode selection. ASPECT RATIO: 1/1: Aspect ratio selection.
BROAD SCAN (HD/SDI) Chapter 1 : INTRODUCTION (continued) 1-8. BROAD SCAN HD (BHD930) REAR PANEL DESCRIPTION O / I: AC power switch (O = OFF, I = ON). POWER: Standard IEC connector (100-250 VAC, 0.5A, 50-60Hz automatic). RS-232: RS-232 communication port on a DB9 female connector. IP/LAN: Ethernet communication port on a RJ45 connector (optional). COMPUTER INPUT & MONITOR AUDIO IN: Analog stereo audio input on 2x RCA female connector (L = Left, R = Right).
Chapter 1 : INTRODUCTION (continued) BROAD SCAN (HD/SDI) 1-9. BROAD SCAN SDI (BSD830) REAR PANEL DESCRIPTION O / I: AC power switch (O = OFF, I = ON). POWER: Standard IEC connector (100-250 VAC, 0.5A, 50-60Hz automatic). RS-232: RS-232 communication port on a DB9 female connector. IP/LAN: Ethernet communication port on a RJ45 connector (optional). COMPUTER INPUT & MONITOR AUDIO IN: Analog stereo audio input on 2x RCA female connector (L = Left, R = Right).
BROAD SCAN (HD/SDI) Chapter 1 : INTRODUCTION (continued) 1-10. BROAD SCAN (BSC730) FRONT PANEL DESCRIPTION Broad Scan ANALOGWAY R ON / OFF: Switch ON or OFF the device (Long push). BLACK: Allows displaying a black screen onto the output. FREEZE: Freezes the displayed output. UNDER/OVER: Image mode selection. ASPECT RATIO: 1/1: Aspect ratio selection. The image and aspect ratio of the source are preserved.
Chapter 1 : INTRODUCTION (continued) BROAD SCAN (HD/SDI) 1-11. BROAD SCAN (BSC730) REAR PANEL DESCRIPTION O / I: AC power switch (O = OFF, I = ON). POWER: Standard IEC connector (100-250 VAC, 0.5A, 50-60Hz automatic). RS-232: RS-232 communication port on a DB9 female connector. IP/LAN: Ethernet communication port on a RJ45 connector (optional). COMPUTER INPUT & MONITOR RGB INPUT: Analog computer input on HD15 female connector.
BROAD SCAN (HD/SDI) Chapter 2 : STARTING 2-1. BROAD SCAN CONNECTIONS Turn OFF all of your equipment before connecting. Connect the AC power supply cord to the BROAD SCAN and to an AC power outlet. Connect your computer sources to the COMPUTER INPUT (HD15) connector or the DVI-D INPUT connector. As required, connect a control monitor on the MONITOR OUT (HD15 or DVI-D) connector. NOTE: The analog (RGB) MONITOR OUT is available only if the COMPUTER source is analog.
Chapter 2 : STARTING (continued) BROAD SCAN (HD/SDI) 2-2. SETTINGS We recommend resetting the BROAD SCAN to all of its default values, with the front panel display menu (CONTROLdefault valueyes) before proceeding. Select the auto-setting menu with the front panel display menu (INPUTAuto setting) and activate this function with ENTER. This function detects automatically the input type of the source connected to the input connectors (DVI & RGB). Then the device performs an auto-centering function.
BROAD SCAN (HD/SDI) Chapter 3 : USING FRAME STORE AND LOGO INSERTION (BHD930 & BSD830) 3-1. LOGO INSERTION This function allows storing up to 4 static logos & 1 animated logo in order to incrust them into the displayed image. • HOW TO STORE A STATIC LOGO: Connect the source of the logo to be stored to the input of the BROAD SCAN. Perform and auto-setting to display it onto the output.
BROAD SCAN (HD/SDI) 3-2. USING THE FRAME STORE This function allows memorizing a frame (an image) in order to display it at any time during the show. • HOW TO STORE A FRAME: Connect the source of the frame to be stored to the input of the BROAD SCAN. Perform and auto-setting to display it onto the output. Select the Record frame mode (LOGOS/FRAMERecord Frame): the device displays a white rectangle corresponding to the frame selection area onto the output.
BROAD SCAN (HD/SDI) Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION 4-1. INTRODUCTION The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE. • The STATUS MODE indicates the input and output status of the device. • The CONTROL MODE allows selecting and adjusting the parameters of the device. 4-2. CONTROL BUTTONS The front panel display is controlled by 2 buttons and 1 knob: knob: • In the CONTROL MODE, turn this knob to scroll thru the different menus.
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI) 4-4. CONTROL MODE The menus of the device are configured as follow: 1 INPUT Available on BHD930 models Depending on the selected format 3 Available if output format = genlock 4 Available for SDTV output format only 5 Available for NTSC output format only 6 Available for analog source type only 7 Available on BHD930 & BSD830 models Auto Setting 2 Input Status Input Type RGB SOG RGB HV/Cs DVI-D Black & White H. sync.
BROAD SCAN (HD/SDI) LOGOS/FRAME 7 Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) 1 Available on BHD930 models 2 Depending on the selected format 3 Available if output format = genlock 4 Available for SDTV output format only 5 Available for NTSC output format only 6 Available for analog source type only 7 Available on BHD930 & BSD830 models Frame ON/OFF Logo Record Frame Logo OFF Logo 1 Logo 2 Logo 3 Logo 4 Logo Animated H. Pos V. Pos Transparency Size H. size V. size Position H.
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI) 4-5. FUNCTIONS DESCRIPTION [INPUT] [Auto settings] This function detects automatically the input type of the source connected to the input connectors (DVI & RGB). Then the device performs an auto-centering function. [Input status] Indicates the status of the selected input.
BROAD SCAN (HD/SDI) Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) 4-5. FUNCTIONS DESCRIPTION (continued) [Genlock Tune]. This function is available only if the Output format selected is Genlock, and if a correct genlock signal is detected on the GENLOCK INPUT connector. [H Phase]: This function allows adjusting the genlock horizontal phase. Adjust with + ENTER. [SC. Phase]: This function allows adjusting the genlock Subcarrier phase. (Available with Analog SDTV Genlock signal only).
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI) 4-5. FUNCTIONS DESCRIPTION (continued) [Gamma] Select one of the 8 levels of the anti-flicker with and validate with ENTER. [Flicker filter] Select one of the 8 levels of the anti-flicker with and validate with ENTER. [Sharpness] Adjust the image sharpness with and validate with ENTER.
BROAD SCAN (HD/SDI) Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) 4-5. FUNCTIONS DESCRIPTION (continued) [LOGOS/FRAME] Available on BHD930 & BSD830 models. [Frame ON/OFF]. Display ON or OFF the stored frame onto the output. [Logo] [Logo OFF]: Display off the logo. [Logo 1]: Display the logo 1. [Logo 2]: Display the logo 2. [Logo 3]: Display the logo 3. [Logo 4]: Display the logo 4. [Logo Animated]: Display the animated logo.
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI) 4-5. FUNCTIONS DESCRIPTION (continued) [Record anim] This mode allows storing an animated logo in order to incrust them into the displayed image. Select an item with + ENTER. [Position] Adjust the position of the logo area with + ENTER. [Size] Adjust the size of the logo area with + ENTER. NOTE: The logo area is limited at an eighth (1/8) of the displayed area.
BROAD SCAN (HD/SDI) Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) 4-5. FUNCTIONS DESCRIPTION (continued) [LAN setup] + ENTER. (Available with the LAN option only) Allows configuring the LAN communication port. Select the UDP or TCP protocol with + ENTER then select items with + ENTER. [device addr.]: Every device connected to an IP network must have a unique IP address. This address is used to reference the specific unit. IP addresses are specified as x.x.x.
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI) 4-5. FUNCTIONS DESCRIPTION (continued) [Edit EDID DVI] Extended Display Identification Data (EDID) is a data structure provided by a computer display to describe its capabilities to a graphics card. The Broad Scan allows to edit a format when none control monitor (computer display) is connected to the broad scan or when you need to work in another format than the native control monitor format.
BROAD SCAN (HD/SDI) Chapter 5 : UPDATING THE DEVICE The device can be updated thanks a computer (PC) via its RS-232 communication port or via its LAN communication port. 5-1. CONNECTIONS Connect the device to an AC power outlet. Switch ON the device (REAR PANEL SWITCH = I). Connect the device to the computer used for the update via the desired communication port.
BROAD SCAN (HD/SDI) Chapter 6 : REMOTE CONTROL SOFTWARE Your device is shipped with a Windows compatible Remote Control Software. This software allows you to control and make all adjustments by a simple mouse click. NOTE: Preferably use Windows NT, 2000 or XP for LAN operation. 6-1. CONNECTIONS CONNECTING TO THE RS-232 PORT: - Connect the serial port of your control device to the RS-232 port (DB9 Female connector) of the device with a straight cable (DB9 Female / DB9 Male).
BROAD SCAN (HD/SDI) Chapter 6 : REMOTE CONTROL SOFTWARE (continued) 6-3. COMMUNICATION SETUP (continued) • CASE OF LAN PORT: - With the front panel display menu of the device, verify the configuration of the LAN communication port (CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port > LAN). - With the Controls menu of the software, select RS232/LAN setup and LAN Setup.
Chapter 6 : REMOTE CONTROL SOFTWARE (continued) 6-4. USING THE SOFTWARE (continued) Click on the Output tab and adjust your input. Click on the Image tab, and then adjust all the needed image parameters.
BROAD SCAN (HD/SDI) Chapter 6 : REMOTE CONTROL SOFTWARE (continued) 6-4. USING THE SOFTWARE (continued) Click on the Lumakey tab to accede to the Luma key adjustment. Click on the Logos Frame tab and make the genlock adjustments. NOTE: Transfer logo mode: The Remote Control Software allows transferring directly a logo from the controlling computer to the Broad scan. This function is very useful for the animated logo (gif image).
BROAD SCAN (HD/SDI) Chapter 7 : TECHNICAL SPECIFICATIONS 7-1. COMPUTER INPUTS • ANALOG COMPUTER INPUT Connector: HD15 female. Line frequency: From 31.5 kHz to 130 kHz. Frame frequency: Up to 130 Hz. Resolution: Up to 1600 x 1200 Signal & Sync. type: RGBHV, RGB/S, RGsB (Sync On Green). Level: R, G, B: 0.7 Vp/p. H & V Sync: TTL. Composite Sync: TTL and 0.3 V. SOG (Sync On Green): 0.3 V. Impedance: R, G, B: 75 Ohm H: Hi-Z or 75 Ohm. V: Hi-Z • DIGITAL COMPUTER INPUT Connector: DVI-I female.
BROAD SCAN (HD/SDI) Chapter 7 : TECHNICAL SPECIFICATIONS 7-2. VIDEO OUTPUTS (continued) • HD-YUV / HD-YCrCb (MODELS: BHD930-AG & BHD930-DG) Connectors: 3 BNC female. Format: 720p @ 60, 59.94 & 50 Hz (SMPTE 296M) 1080i @ 60, 59.94 & 50 Hz (SMPTE 274M) 1035i @ 60 & 59.94 Hz (SMPTE 260M) 1080sF @ 30, 29.97 & 25 Hz (RP2H/SMPTE 274M) 1080p @ 30, 29.97, 25, 24 & 23.98 Hz (RP2H/SMPTE 274M) Level: Y: 1 Vp/p (0.7 V Luma ± 0.3 V Sync.). Cr, Cb: 0.7 Vp/p. Impedance: 75 Ohm. • S.
Chapter 7 : TECHNICAL SPECIFICATIONS (continued) BROAD SCAN (HD/SDI) 7-2. VIDEO OUTPUTS (continued) • SDI LUMA KEY* Connector: BNC female (x2). Format: Same format as the output. Impedance: 75 Ohm. • HD-SDI LUMA KEY (available on BHD930 models only) Connector: BNC female (x2). Format: Same format as the output. Impedance: 75 Ohm. * Available on the BSD830 & BHD930 models only. 7-3. ANALOG GENLOCK (MODELS: BHD930-AG, BSD830-AG & BSC730) Connectors: 2 BNC female.
BROAD SCAN (HD/SDI) Chapter 7 : TECHNICAL SPECIFICATIONS 7-6. ENVIRONMENTAL Power Supply: 100VAC-250VAC ; 50-60Hz ; I = 0.5A Max. Storage Temperature: - 40 °C to + 70 °C (- 40 °F to + 158 °F) Operating temperature: 0 °C to + 50 °C (32 °F to 122 °F) Hygrometry: 10% to 80% (without condensation) Dimensions: Compatible with the 19" standard, height = 1 unit. W 482 mm (19”) x D 265 mm (10.4”) x H 44 mm (1.74”). Weight: 3.3 kg (7.3 Lbs.).
BROAD SCAN (HD/SDI) APPENDIX A: PROGRAMMER'S GUIDE ANNEXE A: GUIDE DE PROGRAMMATION A-1: INTRODUCTION A-1: INTRODUCTION If you need to use your own Software Control program from a PC or WORKSTATION with an RS-232 port, the device allows communication through an ASCII code protocol. The device treats any character that it receives on the RS-232 as a possible command but only accepts legal commands. There is no starting/ending code needed in a command string.
BROAD SCAN (HD/SDI) APPENDIX A / ANNEXE A A-4: COMMANDS AND RESPONSES TABLE COMMAND RESPONSE A-4: TABLE DES COMMANDES ET RÉPONSES COMMAND DESCRIPTION VALUE /VALEUR TYPE COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE MIN MAX FRONT PANEL COMMANDS / COMMANDES DE LA FACE AVANT ws ws Standby function (ON/OFF) Rd/Wr CN CN Frame selection Rd/Wr OB OB Black function Rd/Wr FZ FZ Freeze function. Rd/Wr OV OV Under/Overscan mode selection.
APPENDIX A / ANNEXE A COMMAND RESPONSE BROAD SCAN (HD/SDI) COMMAND DESCRIPTION VALUE /VALEUR TYPE COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE IMAGE COMMANDS / COMMANDES DU MENU IMAGE yC yC Auto-centering CL CL OptimizeClock adjustment MP MP OptimizePhase adjustment IA IA Input aspect ratio selection OA OA Output aspect ratio MIN MAX Rd/Wr Rd/Wr Rd/Wr Rd/Wr Rd/Wr 0 0 0 0 0 1 1 = auto centering (automatic reset). 2744 31 1 0 = 4/3 1 = 16/9 255 0 = 1:1 1 = Full screen 2 = Crop 2 0 = Underscan.
BROAD SCAN (HD/SDI) COMMAND RESPONSE APPENDIX A / ANNEXE A COMMAND DESCRIPTION VALUE /VALEUR TYPE COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE MIN MAX DESCRIPTION LOGOS/FRAME COMMANDS / COMMANDES DU LOGO/FRAME 0 = use mode. 1 = logo recording mode. 2 = animated logo recording mode 3 = frame recording mode. 4 = erasing logo mode. 5 = erasing frame mode. 6 = logo transfer mode. 0 = free. 1 = logo/frame in recalling process. 2 = logo/frame in storing process.
APPENDIX A / ANNEXE A COMMAND RESPONSE BROAD SCAN (HD/SDI) COMMAND DESCRIPTION VALUE /VALEUR TYPE COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE MIN MAX COMMUNICATION COMMANDS / COMMANDES DE COMMUNICATION ne ne Communication port selection Rd/Wr 0 nr nr Reset of the LAN parameters. Rd/Wr 0 ns ns Store the LAN parameters.
BROAD SCAN (HD/SDI) COMMAND RESPONSE APPENDIX A / ANNEXE A COMMAND DESCRIPTION VALUE /VALEUR TYPE COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE STATUS COMMANDS / COMMANDES D’ETAT IK IK Input sync type detection MIN MAX Rd 0 3 Interlaced signal detection. Rd Status of the signal in comparison with Rd the input range frequency. Input format detection Rd 0 0 1 1 0 25 II IO II IO IF IF XF XF Status of the synchronized format (genlock).
APPENDIX A / ANNEXE A BROAD SCAN (HD/SDI) A-5: ASCII / HEX / DEC TABLE ASCII space ! " # $ % & ’ ( ) * + , .
BROAD SCAN (HD/SDI) WARRANTY Analog Way warrants the product against any defects in materials and workmanship for a period of three years from the date of purchase (back to the factory). In the event of any malfunction during the warranty period, Analog Way will, at its discretion, repair or replace the defective units, including free materials and labor.
