Specifications

Easy Fade™ by Analog Way combines
the functions of a High Resolution Video Scaler with
an Audio Video Switcher. It is a state of the art
Scaler / Line Multiplier / Quadrupler / Doubler which
significantly increases Video image resolution and
brightness. 3 Computer inputs are provided for direct
display of your presentations or Internet applications. It
also allows Audio Stereo switching.
Easy Fade is fitted with 4 Video Inputs including one
RGB or YUV component on BNC. Easy Fade includes
an Analog output on an HD15 connector.
Easy Fade includes 2 switching modes: Seamless or
smooth switching. In seamless mode, the computer
output format is identical to one of the 3 Computer
inputs, the one selected as a reference. It allows to
switch with cut, fade and titling effects between this PC
and any Video source. This makes it a perfect solution
for House of Worship applications.
Easy Fade features a non-volatile frame memory that
can be used as a “welcome” or an “alert” message.
This frame can be acquired from any Video input or it
can be downloaded from a computer via RS232 or
optional IP connection.
61
Video Inputs
• 2 x Composite Video
PAL/SECAM = 15.625 kHz / 50Hz
NTSC = 15.735 kHz / 60 Hz
Black and White : 15 kHz/50-60Hz
• 1 x S.Video (Y/C)
PAL/SECAM = 15.625 kHz / 50 Hz
NTSC = 15.735 kHz / 60 Hz
• 1 x Component or RGB/S or RGsB
15.625 kHz/50Hz - 625L
15.735 kHz/60Hz - 525L
RGB/YUV (0.7 Vp/p)
Sync (TTL or 0.3V Analog)
RGsB (SOG: 0.3V Analog)
• Audio Stereo Inputs
COMPUTER INPUTS (Active Loopthrough)
• 3 x Computer (PC, Mac) RGBHV, RGB/S
• Resolution from 640 x 480 up to 1600 x 1200
Display Output
• For Video Input:
- 2 x RGBHV, RGBS or RGsB selectable (buffered H & V
separate Sync. or Composite sync.)
- RGB = 0.7 Vp/p (75 Ohms load)
- Selectable output resolution: 4/3: SVGA: 800x600
XGA: 1024x768
SXGA: 1280x1024
SXGA+: 1400x1050
UXGA: 1600x1200
16/9: WVGA: 852x480
720p: 1280x720
WXGA: 1366x768 (D-ILA)
• For Computer input: from VGA to UXGA (24 kHz to 85 kHz),
RGB HV/S identical to the input (buffered loopthrough)
• Audio stereo output
User Controls and Connectors
FRONT PANEL
• Input Selection from Input 1 to 7
• Freeze: Freeze button
• Effect selection: Cut, fade, titling
• Take
• LCD screen & control buttons for:
- Sharpness, brightness, contrast, color, hue
- Overscan/underscan
- Aspect Ratio (Source & Screen)
- Output format & Sync.
- Horizontal and vertical position and size adjustments
- Front panel control locking
REAR PANEL
Input Connectors:
• Composite 1: BNC connector
• Composite 2: BNC connector
• S.Video: Y/C Mini DIN connector
• RGB/S & Component: 3/4 BNC connectors
• Computer: HD15F connector
• Audio: MCO 5 pin connector and 3.5mm jack stereo
Output Connectors:
• RGB on HD15
• Audio: MCO 5 pin connector
Other:
• DB9-F: Dual RS232 COM Port for full control of the device and
for control of distant display
• RJ45: Optional Ethernet Control
• IEC for mains + On/Off switch
Power Supply
Internal, Universal, and Automatic 100 - 250 VAC; 50 / 60Hz
(20W) (UL, CSA, CE)
Supplied with
• 1 x AC power cable
• 3 x MCO connectors
• 1 x Remote control software (CD)
• 1 x User manual
Dimensions: 19”, 1 unit compatible
D 10.43” x W 19” x H 1.74”
D 265 mm x W 482 mm x H 44 mm
Weight: 3 kg (6.6 lbs)
Warranty
3 year warranty on parts and labor back to factory
Specifications subject to change without prior notice
The very high quality decoder of the Easy Fade inclu-
des an advanced comb filter, an emphasized “natural”
color processing, a highly robust sync. detection and a
3D (pixel by pixel basis) auto-adaptive de-interlacing
scheme (for motion artifacts). With automatic correc-
tion of the “film to video” transfer (3/2 & 2/2 pull down),
it provides a superb image.
Image parameters such as brightness, contrast, color,
aspect ratio and sharpness can be easily adjusted by
the user. These parameters are stored for each Video
input. A preset command enables to go back to factory
settings. Easy Fade also features an automatic or
manual stand-by mode, activated on the front panel or
with the RS232 control. A second Com Port is availa-
ble to automatically Start/Stop a distant display device
according to the stand by status of the Easy Fade.
Black and white composite is also accepted (for indus-
trial, security, camera applications, etc...) on
Easy Fade. The input source aspect ratio 4/3, 16/9,
widescreen can be selected as well as the size of the
screen (4/3 - 16/9). The frame conversion & time base
correction make it a great solution for Professional AV
and Home Theater applications.
Technical Specifications
Cables for Easy Fade
Reference
> EFD341: Easy Fade
TM
Option
- OPT-LAN: Optional TCP/IP control interface
- S.Video Cables from 1.8m / 6ft to 20m / 66 ft:
Ref. 10009 - 10093 - 10094 - 10095
- VGA Cables of 0.4m / 1ft and 1.8m / 6ft (M/F and
M/M): Ref. 10014 - 10015 - 10077
- VGA/BNC Adaptor of 1.8m / 6ft and 3m / 10ft (M/M
and F/M): Ref. 10023 - 10024 - 10025 - 10026
- Remote Cables from 0.5m / 1ft to 30m / 100ft:
Ref. 10109 - 10110 - 10111 - 10112 - 10113 - 10114
- Jack Stereo Cable of 1.2m / 4ft: Ref. 10012 - 10013
Seamless Switchers