Specifications

Square Projection with High Brightness
using One Di-VentiX
PRINCIPLE
A cost-effective solution to replace 4 projectors with horizontal and vertical soft edge blending or 1 LED wall
screen, and still obtain a 1:1 aspect ratio image.
CONNECTIONS
The Di-VentiX is used in vertical Soft-Edge Blending mode with two 16/9 matrix projectors to display a 1:1 aspect
ratio image. For example: Two projectors with a 1920x1080 matrix used in SEB mode (with a 20% covering)
allow to obtain a 1920x1944 resolution projected image.
Computer & Video sources to input #1 to #8 connectors of the Di-VentiX (including SD/HD-SDI & DVI)
Top projector to the MAIN/OUT 1 connectors of the Di-VentiX
Bottom projector to the PREVIEW/OUT 2 connectors of the Di-VentiX
The displayed image can be:
A live image with one or two logos,
A still background image and one live image into a PIP placed across the area covered by the two projectors,
A still background image and two live images into PIPs placed on the top & bottom of the image.
NOTE: The background image will be stretched when displayed on the multi-screen. To preserve the right aspect
ratio of the image, you should provide a compressed image to the Di-VentiX. The aspect ratio of the PIPs can be
controlled by the Di-VentiX itself.
SWITCHING OPERATION
The still background image (frame store) can be switched seamlessly between the 3 Frame Stores,
The transition into the PIP operates with a fade to black or to color.
EQUIPMENT REQUIRED
1 x Di-VentiX
Up to 8 sources
2 x 16/9 Projectors
28