Specifications

High Quality Dual Live PIP over a

Soft-Edge Blended Background Using One Di-VentiX

PRINCIPLE

Make a cost effective High-End presentation with several sources displayed at once on a panoramic screen,

Make this presentation easy to set up and to operate with one single Switcher:

- The Di-VentiX is set up in “Embedded soft-edge blend” mode,

- Di-VentiX drives 2 video-projectors for horizontal (or vertical) soft edge,

- Up to 3 full frame images are stored in the Di-VentiX non volatile memory, for the background,

- Up to 8 sources are connected to the Di-VentiX (PC/HDTV/Video - Analog or Digital) for the content of the 2 PIPs.

Note: The background image will be stretched when displayed on the large multi-screen. To preserve the right

aspect ratio of this image, we recommend to store compressed images.

CONNECTIONS

Sources used in PIP to Input #1 to #8 (including SD/HD-SDI and DVI)

Top or right projector to Main output

Bottom or left projector to Preview output

OPERATING MODE

Set up the Di-VentiX in embedded SEB* mode,

Adjust the SEB,

Store the frames (up to 3). The sources used for storing the frames should be extended,

Select a “Double PIP” holding effect and press “Take”: The frame store is displayed,

Select a source on the main input row and press “Take” to display it into the first PIP,

Select a source on the preview input row and press “Take” to display it into the second PIP.

Note: The PIP can be displayed in background (select Inlay=Yes in the PIP effect adjustment menu).

Note: A PIP source can be displayed on the covering area, only one PIP at a time is available in this configuration.

SWITCHING OPERATION

To change a source into a PIP: Select a source on the corresponding input row and press “Take”,

To change the background frame: Select directly the needed frame in the PIP effect menu adjustement.

EQUIPMENT REQUIRED

1 x Di-VentiX,

Up to 8 sources,

2 x Video-projectors.

Note: The Di-VentiX can be operated directly form the front panel or through RS232 or TCP/IP using the keypad

RK8022-T or our control softwares: Di-VentiX control software, Show Manager OE or Manager Stage.

* SEB: Soft Edge Blending