Specifications

NatiX or Di-VentiX, EventiX and CentriX in Matrix mode

Switch and Scale your sources independently or

simultaneously on 2 separate display devices

PRINCIPLE

Centralize the configuration and the operation of 2 screens from one single iX device,

Centralize all sources on one unit with no need for additional distribution,

Match the native resolution of each display,

The iX device used is configured in Native Matrix mode,

Any source can be displayed on any screen,

Sources can be switched glitchfree on both outputs either simultaneously or independently.

CONNECTIONS

Output 1 is connected to a projector in SXGA+ resolution (for example),

Output 2 is connected to a plasma display with WXGA resolution (for example),

Up to 8 Computer and Video sources can be connected to the device,

A control laptop and/or the remote control unit can be connected to the iX device through RS232 or TCP/IP.

SWITCHING OPERATION

In order to switch on each screen between any 2 sources, the commands can be sent directly from the front

panel (except for CentriX) or through the remote control sofware or a console,

The sources will be switched through back or any color, a captured frame or with a clean cut effect.

EQUIPMENT REQUIRED

1 x NatiX, Di-VentiX, CentriX or EventiX,

2 x Displays (ex. 1 projector and 1 plasma screen),

Up to 8 Computer and/or Video sources,

A remote control unit and/or a laptop with the remote control software (optional when using Natix, EventiX or Di-VentiX)