User manual
Improved Multiscreen Control
STATUS MENUS
New READY status menu: the new menu in the upper right hand corner of the screen shows you the current
connectivity status of each of the 6 screens.
READY is Dark Grey = no device congured on this screen.
READY is light Grey = screen not currently connected.
READY is Green = screen is connected and ready.
New TAKE status menu: the new menu in the upper right hand corner of the screen shows you the current TAKE
status of each of the 6 screens.
TAKE is Dark Grey = no device congured on this screen.
TAKE is light Grey = screen not currently connected.
TAKE is Red = Preview is different than Main, and TAKE will make a change on this screen.
Screen Selection Filter: The improved Multiscreen functions on the Axion2 give you more control over which
screens will be affected with the next [TAKE] or Preset Save/Recall operation. Each screen’s participation in the
next operation can be toggled on or off by pressing the desired screen button in the transition section. You can
conrm whether a screen will be changed in the next operation by looking at the TAKE status menu, or at the color
of the screen buttons.
- When the screen button is Red, this screen is part of the current selection, and the Preview has been
modied from the Main.
- When the screen button is Yellow, this screen is part of the current selection, and the Preview is
identical to the Main.
- When the screen button is Green, this screen is not part of the current selection, (or there is no
device congured on this screen).
*TIP* : To quickly select only one screen for the next operation, without affecting the contents of any
screens, press and hold a single screen button.
PRESETS
Presets can now be saved to affect any number of screens independently. For example, in a 3 screen show, it is
now possible to save a preset which, when recalled, will only affect screens 1 and 3. It is also possible to recall a
preset which was saved to affect many or all screens, and then use the screen selection lter described above to
take on a smaller subset of screens.
Each preset that is saved will only store the screens which are currently selected, as described above. When
this preset is recalled with a standard keypress, only the stored screens will be loaded, and the current screen
selection lter will be adjusted to include only screens that are part of the preset. You can then modify the current
selection to include more or less screens, and then press [TAKE].
34