User manual
32
To load an existing Preset Memory at the begining or at any stage
during your show, proceed as follows:
1/ Press the [LOAD FROM PRESET] button to access the Preset
Memory page.
2/ Select the required button from the Preset Memory section of
the Axion2.
The Axion2 allows for you to make a Preset Memory from your Main
output at any stage during your show (Reload From Main will copy
the Main preset into the preview). To do this, proceed as follows:
1/ Press the [RELOAD FROM MAIN] button in the Preset Edition
section of the Axion2,
2/ Press again to conrm.
90 Preset Memory slots can be acessed from the Preset Memory
section of your Axion2. The 1
st
30 are available on page 1, 31 to 60
on page 2 and 61 to 90 on page 3.
Loading a Preset Memory
Reload Memory from Main
Accessing Memory pages
A Preset Memory can be viewed as a scene for your show or event.
In a Preset Memory, users store the setup and parameters of all
layers on a Screen to the Axion2 memory. The Axion2 can save
up to 90 Preset Memories per Screen. To save a Preset Memory,
proceed as follows:
1/ Congure all layers as required in your Screen. Once this
is done, press the [SAVE TO PRESET] button in the Preset
Memory section of the Axion2.
2/ Press the required [PRESET] button in the preset memory
section.
Saving a Preset Memory