User manual

Logos on your Screen can be positioned anywhere.

NOTE: Keying attributes are available only during capture (see also

Logos & Frames).

To position a logo:

1/ Select the logo you wish to move.

2/ In the Layout section, press the [POS] button, and move the

logo with the help of the joystick (see also Using The Joystick).

3/ When you have reached the desired position, press the [TAKE]

button to view the result on the Main output.

NOTE: You can also adjust the transparency, the opening and the

closing effects.

To add a logo to your Screen, proceed as follows:

1/ Press the [ADD LOGO] button to activate the Logo outline

rectangle on the screen. The touch screen of the Axion2 will

display a yellow rectangle, indicating the logo size and position.

2/ The blue Main/Preview section light will blink to indicate you can

select the source you want to use as a logo. Press a [SOURCE

PREVIEW] button (#1 to #12). The chosen logo should now

appear on your Preview output in the Logo rectangle, and

on the touch screen of the Axion2 in the shape of a yellow

rectangle above any Frame or live element.

3/ After adjusting the position, press the [TAKE] button to view the

result on your Main output.

4/ To add another logo, follow steps #1 to #3 again.

To select the LOGO you wish to work with, press several times on the

[SELECT LOGO] button until the required logo is activated in yellow,

or press on the LOGO outline on the touch screen of the Axion2. Or

arrow keys on the cycle element section (cf. Selecting a PIP).

5-6. WORKING WITH LOGOS

Adding a Logo

Selecting a Logo

Manipulating a Logo

Logo depth

A LOGO can be moved up or down through the successive logo layer

hierarchy. In other words, you can change the order of a LOGO from

under another LOGO to be on top of it.

1/ Select the LOGO you want to move up or down.

2/ In the preset edition section, press the [LOWER] button to

move the LOGO back in the order of LOGOS on screen, press

the [RAISE] button to bring the LOGO to front.