User guide

If you would like for AW Gateway to start each
me your system starts, you can check the box
OpentheapplicaonautomacallyonStartup.
If you would like for AW Gateway to start
listening for incoming connecons and connect
automacally the Analog Way switcher
each me the applicaon starts (or when it
gets disconnected), you can check the box
Automacallystarttheserverandconnectthe
device.
If you would like for AW Gateway to start
minimized to tray, you can check the box Start
minimized to tray.
To terminate the program, choose Quit in the context menu of the
system tray entry.
RUNNING AW GATEWAY
DIAGRAM
Example #1: A SmartMatriX² controlled simultaneously by a RCS², a RK-350 and a third
party applicaon (AMX/Creston drivers).
Once the server started and a connecon to the Analog Way switcher established, you can
start connecng one or more event controllers to the AW Gateway service. Each controller
will have to connect AW Gateway using the IP address of the computer running the
AW Gateway applicaon (and not the Analog Way switcher directly as usual). When a new
incoming connecon is accepted by AW Gateway, the applicaon automacally displays
the total number of connecons currently serviced.