Instruction Manual
PRELIMINARY
PRELIMINARY
57
7.4.6 Logos and Frames management
On the Edit secon, you can have access to your 8 sll slots. Those slots can be lled by logos and frames.
To load the slots, go into the Setup secon and click on Logos menu.
Or into the Edit secon, under the logos tab, click on the Setup buon to access to the slot conguraon.
Choose the logo into your library to ll the slot. Other logos setups are available. (See chapter: 7.3.11 Logo
management)
7.5 Live
Use only the live mode when all your pre-
sets are correctly done and ready to use. This
mode is for live use.
On the right, you will nd all your memorized
presets under the tab called “ MEMORIES ”.
A simple drag and drop on the screen will
load your preset into the screen (Program or
Preview).
You can at any me modify a memory by
clicking on the Setup shortcut on the right of
you preset memory.
LABEL: don’t forget that you can aect a name
to your memories.
If you want to change an input into your pre-
set into the live mode, simply use the le
source ribbon and drag and drop your input
into a layer.
Under each preset you have its size and its du-
raon.
Remember that a preset saved into a screen
with a 1024x768 resoluon, will keep its size
into a screen of higher resoluon.
If you want the preset to be adapted to the
screen size, use the AUTOSCALE buon. With
this funcon enabled, all presets will be auto-
macally stretched to the right size to ll the
selected screen.
FILTER FEATURE: use the Filter feature to
load and take only some presets informaon.
Choose between: source, pos/size, transpa-
rency, cropping, border, transions, eects, -
ming, speed, ying curves, Nave background
and ALL at the same me. Only the selected
feature will be load and take with the preset.
If you want to load the enre preset, please
use ALL.