User guide
Contextual
buons
Menu scroll
knob
access Frame #1 to #4
or Logo #1 to #4
ll in a layer with a color
- 6 x HDMI
- 9 x DVI (6 x DVI-I & 3 x DVI-D)
(Dual link available on Inputs 2, 6 & 10)
- 3 x DisplayPort
(Dual link available on Inputs 4, 8 & 12)
- 12 x 3G/HD/SD-SDI
- 12 x Universal Analog
(6 x HD15 & 6 x DVI-A)
- 8 x Universal Analog (4 x HD15 & 4 x DVI-A)
- 4 x DVI-I (DVI Dual-Link on outputs #1 & #3)
- 4 x Video Opcal SFP module cage
- 4 x 3G/HD/SD-SDI
not scaled layer.
scaled layers
edit Program
edit Preview
Recall the last preset into your
Preview monitor
4.3’’ TFT color display
Hold for 3 seconds for
stand-by mode to force power o
USB Plug
Ethernet Plug
Tally
Analog Frame
Lock plug and
specic loop
output
Use the 3 link cables to share
inputs/outputs in the addive
modularity conguraon.
Home menu
or back one level
validate the menu
or command
100-240 VAC; 8A;
50/60Hz; 345W; internal,
autoswitchable
Reserved for
manufacturer
4 x USB Plugs
Used for eect sync in
mul-machine mode.
See User’s Manual for details
load a preset
save a preset
Transion the pre-selected
sources onto the Program
output with the selected eects
- 2 x Universal Analog (HD15 & DVI-A)
- 1 x DVI-I
- 2 x SD/HD/3G SDI
- 1 x RGBs/RGsB/RGB/YPrBr/YC/comp
Analog output
clear a layer
adjust Layer properes
press before selecng
the Logo/Frame number
freeze the input linked to
the current layer on the Program
select
a screen
The user should avoid disconnecng the power source
(AC input) unl the unit is in stand-by mode. Failure to
do this could result in hard drive data corrupon.