Manual

PRELIMINARY

11.1 Auto Calibraon

11. MAINTENANCE AND SUPPORT

Ascender 32 includes an automac calibraon system. This system will calibrate all analog outputs/inputs

thanks to internal test paern. To be sure the calibraon will do in the right way, please unplug all video

input/output cable. The unit is able to perform itself the calibraon without any other devices plugged.

Go into the CONTROL menu, and then auto calibrate.

Choose Input or Output calibraon and

click and START buon to launch the

process.

NOTE: Don’t press START if you are

running a show, live modicaons can

appear on your screen.

Don’t press START if you don’t need any

calibraon.

Ascender 32, thanks to the Ethernet connecon, can be controlled by an external user using the remote

maintenance system. This remote maintenance is based on an Ethernet access thanks to the RJ45 cable.

To be able to control the unit from another place, your unit as to be connected to the web, please check into

the Dashboard if all alarms are GREEN, parcularly the ETHERNET alarm, and the WEB alarm.

To acvate the remote maintenance or to receive more informaon about this service, please contact your

local technical support.

11.1 

11.2 