Datasheet

TMP05/TMP06 Data Sheet
Rev. C | Page 4 of 28
Parameter Min Typ Max Unit Test Conditions/Comments
TMP05 OUTPUT (PUSH-PULL)
3
Output High Voltage (V
OH
) V
DD
− 0.3 V I
OH
= 800 µA
Output Low Voltage (V
OL
) 0.4 V I
OL
= 800 µA
Output High Current (I
OUT
)
4
2 mA Typ V
OH
= 3.17 V with V
DD
= 3.3 V
Pin Capacitance
10
pF
Rise Time (t
LH
)
5
50 ns
Fall Time (t
HL
)
5
50 ns
R
ON
Resistance (Low Output) 55 Ω Supply and temperature dependent
TMP06 OUTPUT (OPEN DRAIN)
3
Output Low Voltage (V
OL
) 0.4 V I
OL
= 1.6 mA
Output Low Voltage (V
OL
) 1.2 V I
OL
= 5.0 mA
Pin Capacitance 10 pF
High Output Leakage Current (I
OH
) 0.1 5 µA PWM
OUT
= 5.5 V
Device Turn-On Time
20
ms
Fall Time (t
HL
)
6
30 ns
R
ON
Resistance (Low Output) 55 Ω Supply and temperature dependent
DIGITAL INPUTS
3
Input Current ±1 µA V
IN
= 0 V to V
DD
Input Low Voltage (V
IL
) 0.3 × V
DD
V
Input High Voltage (V
IH
) 0.7 × V
DD
V
Pin Capacitance 3 10 pF
1
It is not recommended to operate the device at temperatures above 125°C for more than a total of 5% (5,000 hours) of the lifetime of the device. Any exposure beyond
this limit affects device reliability.
2
Normal mode current relates to current during T
L
. TMP05/TMP06 are not converting during T
H
, so quiescent current relates to current during T
H
.
3
Guaranteed by design and characterization, not production tested.
4
It is advisable to restrict the current being pulled from the TMP05 output because any excess currents going through the die cause self-heating. As a consequence,
false temperature readings can occur.
5
Test load circuit is 100 pF to GND.
6
Test load circuit is 100 pF to GND, 10 kΩ to 5.5 V.