Datasheet

SSM2603 Data Sheet
Rev. C | Page 28 of 32
ACTIVE, ADDRESS 0x09
Table 32. Active Register Bit Map
D8 D7 D6 D5 D4 D3 D2 D1 D0
0
0
0
0
0
0
0
0
Active
Table 33. Descriptions of Active Register Bit
Bit Name Description Settings
Active Digital core activation control 0 = disable digital core (default)
1 = activate digital core
SOFTWARE RESET, ADDRESS 0x0F
Table 34. Software Reset Register Bit Map
D8 D7 D6 D5 D4 D3 D2 D1 D0
Reset[8:0]
Table 35. Descriptions of Software Reset Register Bits
Bit Name Description Settings
Reset[8:0] Write all 0s to this register to set all registers to their default settings. Other data written to
this register has no effect.
0 = reset (default)