Datasheet

Data Sheet OP177
Rev. H | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Ratings
Supply Voltage ±22 V
Internal Power Dissipation
1
500 mW
Differential Input Voltage ±30 V
Input Voltage ±22 V
Output Short-Circuit Duration Indefinite
Storage Temperature Range −65°C to +125°C
Operating Temperature Range −40°C to +85°C
Lead Temperature (Soldering, 60 sec) 300°C
DICE Junction Temperature (T
J
) −65°C to +150°C
1
For supply voltages less than ±22 V, the absolute maximum input voltage is
equal to the supply voltage.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
THERMAL RESISTANCE
θ
JA
is specified for worst-case mounting conditions, that is, θ
JA
is
specified for device in socket for PDIP; θ
JA
is specified for
device soldered to printed circuit board for SOIC package.
Table 4. Thermal Resistance
Package Type
θ
JA
θ
JC
Unit
8-Lead PDIP (P-Suffix) 103 43 °C/W
8-Lead SOIC (S-Suffix)
158
43
°C/W
ESD CAUTION