Datasheet

MAT03
–3–
REV. C
ABSOLUTE MAXIMUM RATINGS
1
Collector-Base Voltage (BV
CBO
) . . . . . . . . . . . . . . . . . . . 36 V
Collector-Emitter Voltage (BV
CEO
) . . . . . . . . . . . . . . . . . 36 V
Collector-Collector Voltage (BV
CC
) . . . . . . . . . . . . . . . . . 36 V
Emitter-Emitter Voltage (BV
EE
) . . . . . . . . . . . . . . . . . . . 36 V
Collector Current (I
C
) . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Emitter Current (I
E
) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Total Power Dissipation
Ambient Temperature ≤ 70°C
2
. . . . . . . . . . . . . . . 500 mW
Operating Temperature Range
MAT03E/F . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Operating Junction Temperature . . . . . . . . . –55°C to +150°C
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . . 300°C
Junction Temperature . . . . . . . . . . . . . . . . . –65°C to +150°C
NOTES
1
Absolute maximum ratings apply to both DICE and packaged devices.
2
Rating applies to TO-78 not using a heat sink and LCC; devices in free air only. For
TO-78, derate linearly at 6.3 mW/°C above 70°C ambient temperature; for LCC,
derate at 7.8 mW/°C.
ORDERING GUIDE
V
OS
max Temperature Package
Model (T
A
= +25ⴗC) Range Option
MAT03EH 100 µV –40°C to +85°C TO-78
MAT03FH 200 µV –40°C to +85°C TO-78
WARNING!
ESD SENSITIVE DEVICE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the MAT03 features propriety ESD protection circuitry, permanent damage may occur
on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions
are recommended to avoid performance degradation or loss of functionality.