Lite Board Evaluation System Manual

Connectors
2-20 ADSP-21364 EZ-KIT Lite Evaluation System Manual
JTAG Header (ZP4)
The JTAG header (ZP4) is the connecting point for a JTAG in-circuit
emulator pod. When an emulator connects to the JTAG header, the USB
debug interface is disabled.
L
Pin 3 is missing to provide keying. Pin 3 in the mating connector
should have a plug.
L
When using an emulator with the EZ-KIT Lite board, follow the
connection instructions provided with the emulator.
Part Description Manufacturer Part Number
14-pin IDC header (ZP4) FCI 68737-414HLF