Datasheet
UG-408 Evaluation Board User Guide
Rev. A | Page 14 of 20
DESCRIPTION OF USER SOFTWARE PANEL
The user software panel, as shown in Figure 15, has the
following features. Refer to the labels numbered 1 through 11.
File menu (labeled 1 in Figure 15) offers choices of
• Load data. Load previously captured data in tab separated
values (tsv) format for analysis.
• Save data as .tsv. Save captured data in tsv format
for future analysis.
• Print front panel picture. Use to print the front panel to
your default printer.
• Save picture. Use to save the current screen capture.
• Exit.
Drop-down menu (labeled 2 in Figure 15) is used to select the
generic AD7366 or AD7367. The resolution of selected part is
displayed.
Sample Rate (labeled 3 in Figure 15) can be selected from the
drop-down menu. Rates of 800 kSPS, 500 kSPS, 400 kSPS,
200 kSPS, 100 kSPS, and 50 kSPS are allowed.
The SCLK frequency is fixed to 30 MHz when using the EVAL-
AD7366SDZ/EVAL-AD7367SDZ in conjunction with the
EVA L-SDP-CB1Z board.
Voltage Range (labeled 4 in Figure 15). Use this in conjunction
with LK18 and LK19. Ensure that this setting matches the hard-
ware setting.
Exit (labeled 5 in Figure 15). Use this to exit the software.
Alternatively, go to File>Exit.
There are four tabs (labeled 6 in in Figure 15) available
displaying the data in different formats:
• Wave form
• Histogram
• FFT
• Summary
Select the number of samples (labeled 7 in Figure 15) to analyze.
Choose Sample to perform a single capture (labeled 8 in
Figure 15).
Choose Continuous to perform a continuous capture (labeled 9
in Figure 15) from the ADC. Click again to stop sampling.
This LED (labeled 10 in Figure 15) indicates when a read is in
progress from the EVA L-SDP-CB1Z board.
Channel display buttons (la
beled 11 in Figure 15). Use these to
display multiple channel reads on the display. Select only one
channel for FFT analysis.
Within any of the chart panels, the following tools allow user
control of the different chart displays:
is used for controlling the cursor, if present.
is used for zooming in and out.
is used for panning.