Datasheet

UG-408 Evaluation Board User Guide
Rev. A | Page 10 of 20
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The E VA L-AD7366SDZ/EVAL-AD7367SDZ evaluation kit
includes software on a CD. Click the setup.exe file from the
CD to run the install. The default location for the software is
C:\Program Files\Analog Devices\AD7366/AD7367.
It is important to install the evaluation software before
connecting the evaluation board and the EVA L-SDP-CB1Z
board to the USB port of the PC. This ensures that the evalu-
ation system is correctly recognized when connected to the PC.
There are two parts to the installation
1. AD7366/AD7367 evaluation board software installation.
2. EVA L-SDP-CB1Z system demonstration platform board
drivers installation.
Figure 3 to Figure 7 show the separate stages of the evaluation
software. Figure 8 to Figure 12 show the separate steps to install
the EVA L-SDP-CB1Z drivers. Proceed through all of the install-
ation steps, allowing the software and drivers to be placed in the
appropriate locations. Only after the software and drivers have
been installed should you connect the EVA L-SDP-CB1Z board
to the PC.
06704-003
Figure 3. AD7366/AD7367 Install Window 1
06704-004
Figure 4. AD7366/AD7367 Install Window 2
06704-005
Figure 5. AD7366/AD7367 Install Window 3
06704-006
Figure 6. AD7366/AD7367 Install Window 4
06704-007
Figure 7. AD7366/AD7367 Install Window 5.