Datasheet

UG-224 Evaluation Board User Guide
Rev. 0 | Page 8 of 20
09553-007
Figure 7. ADC Setup Window
CONFIGURATION ASSIST TOOL
The AD7194 Evaluation Software can be used as a configuration
assist tool, even when an AD7194 evaluation board is not connected.
The configuration assist tool can be used by doing the following:
1. When the AD7194 Evaluation Software opens, click the
ADC Setup button.
2. The message in Figure 8 appears.
3. Click Ignore.
4. The ADC Setup window then opens. In the ADC Setup
window, the user can determine the values written to the
AD7194 on-chip registers for different configurations.
The Registers HEX values pane can be used. When the
values in this section are altered, the other sections of the
ADC Setup window are updated so that the user easily
sees the impact of the register changes. Alternatively, the
user can alter the Analog Inputs, Digital Filter, Vo lt ag e
Reference, Mode of Operation, Clock Configuration,
Digital Outputs, and Output Data Format panes. The
Registers HEX values pane is updated with changes;
therefore, the user can easily calculate the values written to
the AD7194 for different configurations.
09553-008
Figure 8. Configuration Tool