Datasheet

Evaluation Board User Guide UG-224
Rev. 0 | Page 11 of 20
USER UNITS SETUP
From the AD719x Evaluation Board Software main window,
click the User Units Setup button to open the User Units Setup
window. The User Units Setup window allows the user to define
the display units for the conversions. The offset and gain error
of the system can also be calibrated. The user can perform a
system offset and system full-scale calibration. The resulting
coefficients are held in memory; they are not written to the
calibration registers of the ADC.
09553-011
Figure 11. User Units Setup Window