Datasheet

UG-222 Evaluation Board User Guide
Rev. 0 | Page 6 of 20
USING THE AD7190/AD7192 EVALUATION BOARD WITH THE PC SOFTWARE
SOFTWARE INSTALLATION
The AD7190/AD7192 evaluation board software should be
installed before connecting the AD7190/AD7192 evaluation
board to the PC.
EVALUATION SOFTWARE INSTALLATION
To install the evaluation software, perform the following steps:
1. Insert the AD7190/AD7192 evaluation kit CD in the CD-
ROM drive of your PC. The Evaluation software
installation wizard should start automatically after
inserting the CD. If the wizard does not start, navigate to
the AD7190/AD7192 evaluation kit CD on your PC and
start Setup.exe.
2. At the prompt, select a destination directory, which is
C:\Program Files\Analog Devices\AD7190/AD7192 by
default. After the directory is selected, the installation
procedure copies the files into the relevant directories on
the hard drive. The installation program creates a program
group called Analog Devices with the subgroup
AD7190/AD7192 in the Start menu of the taskbar.
3. When the installation procedure is complete, double-click
the AD7190/AD7192 icon to start the program.
EVALUATION BOARD INSTALLATION
To install the evaluation board,
1. Connect the AD7190/AD7192 evaluation board to your
PC USB connector using the USB cable included in the
evaluation kit. The POWER LED on the evaluation board
should turn on and Found new hardware wizard should
start automatically on the PC.
2. Follow the steps in the wizard until the installation is
completed.
USING THE SOFTWARE
Start the AD7190/AD7192 evaluation software on the PC. Click
on the Windows® Start button, then click All Programs, Analog
Devices, AD7190/AD7192, and finally AD7190/AD7192
evaluation software.
The software allows you to configure the AD7190/AD7192,
gather samples, and analyze the data. Consult the AD7190/
AD7192 data sheets for further information on the register bits
and their functions. Figure 6 shows the main window that is
displayed when the program starts. The Main Window section
briefly describes the various menu and button options in the
main window.
The data that has been read can be exported to other packages,
such as MathCAD™ or Microsoft® Excel®, for further analysis.
09551-006
Figure 6. AD7190/AD7192 Evaluation Software Main Window