Datasheet

UG-478 EVAL-AD7176-2SDZ User Guide
Rev. A | Page 14 of 40
Installing the EVAL-SDP-CB1Z System Demonstration
Platform Board Drivers
After the installation of the evaluation software is complete, a
welcome window is displayed for the installation of the EVA L-
SDP-CB1Z system demonstration platform board drivers.
1. With the EVAL -SDP-CB1Z board still disconnected from
the USB port of the PC, make sure that all other applications
are closed, and then click Next.
Figure 13. EVAL-SDP-CB1Z Drivers Setup:
Beginning the Drivers Installation
2. Select the location to install the drivers, and then click Next.
Figure 14. EVAL-SDP-CB1Z Drivers Setup:
Selecting the Location for Drivers Installation
3. Click Install to confirm that you would like to install the
drivers.
Figure 15. EVAL-SDP-CB1Z Drivers Setup:
Granting Permission to Install Drivers
4. To complete the drivers installation, click Finish, which
closes the installation wizard.
Figure 16. EVAL-SDP-CB1Z Drivers Setup:
Completing the Drivers Setup Wizard
5. Before using the evaluation board, you must restart the
computer.
Figure 17. EVAL-SDP-CB1Z Drivers Setup:
Restarting the Computer
11035-010
11035-011
11035-012
11035-013
11035-014