Datasheet
UG-478 EVAL-AD7176-2SDZ User Guide
Rev. A | Page 12 of 40
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION PROCEDURES
The EVA L-AD7176-2SDZ evaluation kit includes a CD
containing software to be installed on your PC before you begin
using the evaluation board.
There are two parts to the installation:
• AD7176-2 evaluation board software installation
• EVA L-SDP-CB1Z system demonstration platform board
drivers installation
Warning
The evaluation software and drivers must be installed before
connecting the evaluation board and EVA L -SDP-CB1Z board to
the USB port of the PC to ensure that the evaluation system is
correctly recognized when it is connected to the PC.
Installing the AD7176-2 Evaluation Board Software
To install the AD7176-2 evaluation board software,
1. With the EVAL -SDP-CB1Z board disconnected from the
USB port of the PC, insert the installation CD into the CD-
ROM drive.
2. Double-click the setup.exe file to begin the evaluation board
software installation. The software is installed to the
following default location: C:\Program Files\Analog
Devices\AD7176-2.
3. A dialog box appears asking for permission to allow the
program to make changes to your computer. Click Ye s.
Figure 8. AD7176-2 Evaluation Software Installation:
Granting Permission for the Program to Make Changes to Your Computer
4. Select the location to install the software, and then click Next.
(Figure 9 shows the default locations, which are displayed
when the window opens, but you can select another location
by clicking Browse.)
Figure 9. AD7176-2 Evaluation Software Installation:
Selecting the Location for Software Installation
5. A license agreement appears. Read the agreement, and then
select I accept the License Agreement and click Next.
Figure 10. AD7176-2 Evaluation Software Installation:
Accepting the License Agreement
11035-005
11035-006
11035-007