Datasheet

EVAL-AD5764R
Rev. 0 | Page 5 of 12
EVALUATION BOARD SOFTWARE
1. Connect the AD5764R evaluation board to the USB port of
your PC using the supplied cable.
SOFTWARE INSTALLATION
The AD5764R evaluation kit includes self-installing software on
a CD. The software is compatible with Windows 2000/NT/XP. If
the setup file does not run automatically, you can run setup.exe
directly from the CD.
2. When the evaluation board is detected, proceed through
any dialog boxes that appear. This finishes the installation.
SOFTWARE OPERATION
To launch the software, complete the following steps:
Install the evaluation software before connecting the evaluation
board to the USB port of the PC to ensure that the evaluation
board is correctly recognized when connected to the PC.
1. From the Start menu, select Analog Devices; then select
AD5764R.
2. Click AD5764R Evaluation Software. The main window
of the software is displayed (see Figure 2).
After the installation from the CD is complete, power up the
AD5764R evaluation board as described in the Power Supplies
section.
08161-002
Figure 2. Main Window