Datasheet

EVAL-AD5764EB
Rev. 0 | Page 5 of 12
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The AD5764 evaluation kit includes self-installing software on CD-ROM. The software is compatible with Windows 2000/NT/XP.
If the setup file does not run automatically, setup.exe can be run from the CD-ROM.
The evaluation software should be installed before connecting the evaluation board to the PC’s USB port to ensure that the evaluation
board is correctly recognized when connected to the PC.
1. After the installation from the CD-ROM is complete, power up the AD5764 evaluation board as described in the
Power Supplies
section. Then, connect it to the USB port of your PC using the supplied cable.
2. When the evaluation board is detected, proceed through any dialog boxes that appear. This finishes the installation.
SOFTWARE OPERATION
To launch the software, select the AD5764 submenu from the Analog Devices menu. Next, click AD5764 Evaluation Software.
Figure 2 displays the main window.
05961-002
Figure 2. Main Window
This window is divided into five sections: Read/Write Registers, Function Register Configuration, Hardware Configuration, Measure
AD5764 Core Temperature and Calibration.