Datasheet

UG-155 Evaluation Board User Guide

Rev. 0 | Page 10 of 12

BILL OF MATERIALS

Table 4.

Qty. Reference Designator Description Supplier/Part Number

1 U8 12-bit ADC Analog Devices AD7476

1 U7 Matrix switch/multiplexer Analog Devices ADG738

1 L1 Ferrite bead Digi-Key 490-1024-1-ND

LK2, LK3, LK4, LK9, LK10, LK11,

LK12, LK13, LK14

Jumper block, 2-way, 2.54 mm pitch spacing

FEC 1022247 and 150-411

3 LK5, LK7, LK8 Jumper block, 3-way, 2.54 mm pitch spacing FEC 1022248

6 J4, J5, J6, J7, J8, J9 SMB jack 50 Ω FEC1206013

1 J3 120-way female connector FEC 1324660

1 U3 32 kb I

C serial EEPROM FEC 1331330

2 J1, J2 Terminal block, 2-way FEC 151789

3 C2, C3, C9 Case A 10 µF capacitor FEC 197-130

1 C7 0603 10 µF capacitor FEC 318-8840

2 LK1, LK6 SIL header, 3-way FEC 512-047 and 150-411

13 TP1 to TP12 Red test point FEC 8731144 (pack)

C1, C4, C5, C6, C8, C10,

C19, C20, C21

0603 100 nF capacitor FEC 8820023

4 R1, R2, R3, R4 SMD resistor FEC 933-0399

1 R5 0603 1.5 Ω resistor, 5%, 0.063 W FEC 9331832

2 U4, U5 Octal buffer/line driver FEC 9591915

1 U1 Octal 16-bit DAC with on-chip reference in LFCSP Analog Devices AD5668(CP)

1 U2 Octal 16-bit DAC with on-chip reference in TSSOP Analog Devices AD5668(RU)

1 U6 Low dropout voltage reference Analog Devices REF195