Datasheet
EVAL-AD5667R
Rev. 0 | Page 5 of 12
EVALUATION BOARD SOFTWARE
07299-002
Figure 2. AD5667R Evaluation Software Main Window
The main window of AD5667R evaluation software opens,
as shown in Figure 2. The data programmed into the 24-bit
input shift register is displayed.
INSTALLING THE SOFTWARE
The AD5667R evaluation kit includes self-installing software on
CD. The software is compatible with Microsoft® Windows® 2000
and Windows XP.
2. To select the command bits, the address bits, and the data
bits, click the appropriate option button under each
section.
The software should be installed before connecting the evalua-
tion board to the USB port of the PC. This ensures that the
board is correctly recognized when connected to the PC.
Command Bits
1. To select a command to program the part, click the
appropriate option button under the Command Bits
section. For example, to program all DAC outputs with full
scale, click Write to and Update DAC channel n.
1. Start the Windows operating system and insert the CD.
The installation software should launch automatically. If it
does not, run the setup.exe file directly from the CD.
2. After installation from the CD is complete, power up the
AD5667R evaluation board as described in the Power
Supplies section. Connect the board to the USB port of the
PC using the cable supplied.
2. Select Both DACs in the Address Bits section.
3. In the Data Bits section, enter data in the Hex Value or
Vo lt ag e box.
4. To execute, click Write to Par t. You must click Write to
Part to execute all writes to the part.
Once the software detects the evaluation board, proceed
through any additional dialog boxes to finalize the installation.
5. Other commands that the AD5667R evaluation software
lets you program include powering down DAC bits, reset-
ting bits, and setting up the LDAC register bits. This is
done by clicking on the corresponding option button
under the Command Bits section and then clicking Write
to Part. You can also set the register bits for the required
mode of operation. Consult the AD5667R data sheet for
details.
SOFTWARE OPERATION
1. From the Analog Devices menu, click Start > All
Programs > Analog Devices > AD5667R > AD5667R
Evaluation Software.
For older PCs, click Start > Programs > Analog Devices >
AD5667R > AD5667R Evaluation Software.