Datasheet
Data Sheet AD5560
Rev. D | Page 17 of 68
Pin No. Mnemonic Description
18 VREF Reference Input for DAC Channels, Input Range 2 V to 5 V.
19, 44 AGND Analog Ground.
20, 30, 45 AV
SS
Negative Analog Supply Voltage. These pins supply DACs and other high voltage circuitry, such as
measure blocks.
21, 33, 46 AV
DD
Positive Analog Supply Voltage. These pins supply DACs and other high voltage circuitry, such as
measure blocks.
22 MEASOUT Multiplexed DUT voltage sense, DUT current sense, Kelvin sense, or temperature output; refer to AGND.
23 C
C3
Compensation Capacitor Input 3.
24 C
C0
Compensation Capacitor Input 0.
25 C
C1
Compensation Capacitor Input 1.
26 C
C2
Compensation Capacitor Input 2.
27 SLAVE_IN Slave Input When Ganging Multiple DPS Devices.
28
MASTER_OUT
Master Output When Ganging Multiple DPS Devices.
29 SYS_SENSE External Sense Signal Output.
31 SYS_FORCE External Force Signal Input.
32 FORCE Output Force Pin for Internal Current Ranges.
34 NC No Connect.
35 C
F4
Feedforward Capacitor 4.
36 C
F3
Feedforward Capacitor 3.
37 C
F2
Feedforward Capacitor 2.
38 C
F1
Feedforward Capacitor 1.
39 C
F0
Feedforward Capacitor 0.
40 DUTGND Device Under Test Ground.
41 SENSE Input Sense Line.
42
EXTMEASIL
Low Side Measure Current Line for External High Current Ranges.
43
GUARD/SYS_DUTGND
Guard Amplifier Output Pin or
System Device Under Test Ground Pin. See the DPS Register 2 in Table 19
for addressing details.
47 EXTMEASIH1 Input High Measure Line for External High Current Range 1.
48 EXTMEASIH2 Input High Measure Line for External High Current Range 2.
49, 55, 61 HCAV
DD
1A,
HCAV
DD
1B,
HCAV
DD
1C
High Current Positive Analog Supply Voltage, for EXTFORCE1 Range.
50, 56, 62 EXTFORCE1A,
EXTFORCE1B,
EXTFORCE1C
Output Force. This pin is used for high Current Range 1, up to a maximum of ±1.2 A.
51, 57, 63 HCAV
SS
1A,
HCAV
SS
1B,
HCAV
SS
1C
High Current Negative Analog Supply Voltage, for EXTFORCE1 Range.
52, 58 HCAV
SS
2A, HCAV
SS
2B High Current Negative Analog Supply Voltage, for EXTFORCE2 Range.
53, 59 EXTFORCE2A,
EXTFORCE2B
Output Force. This pin is used for high Current Range 2, up to a maximum of ±500 mA.
54, 60
HCAV
DD
2A,
HCAV
DD
2B
High Current Positive Analog Supply Voltage, for EXTFORCE2 Range.
64 GPO Extra Logic Output Bit. Ideal for external functions such as switching out a decoupling capacitor at DUT.
65 EP The exposed pad is internally connected to AV
SS
.