Datasheet

EVAL-AD5422
Rev. 0 | Page 6 of 12
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The AD5422 evaluation kit includes self-installing software on a
CD. The software is compatible with Windows 2000/NT/XP. If
the setup file does not run automatically, you can run setup.exe
from the CD.
Install the evaluation software before connecting the evaluation
board to the USB port of the PC to ensure that the evaluation
board is correctly recognized when connected to the PC. After the
CD installation is complete,
1. Power up the AD5422 evaluation board as described in the
Power Supplies section.
2. Connect the board to the USB port of your PC using the
supplied cable.
3. When the evaluation board is detected, proceed through
any dialog boxes that appear. This finishes the installation.
USING THE SOFTWARE
To launch the software, complete the following steps:
1. From the Start menu, select Analog Devices – AD5422,
and then select AD5422 Evaluation Software. The main
window of the software opens (see Figure 3).
2. If the evaluation board is not connected to the USB port
when the software is launched, a connectivity error is
displayed (see Figure 2). Simply connect the evaluation
board to the USB port of the PC and click Retry.
08230-002
Figure 2. Connectivity Error Alert
08230-003
Figure 3. Main Window