Datasheet

EVAL-AD5292EBZ
Rev. 0 | Page 4 of 12
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The AD5292 evaluation kit includes self-installing software on a
CD-ROM. The software is compatible with Microsoft® Windows®
2000 and Windows XP.
The software should be installed before the evaluation board
is connected to the USB port of the PC. This ensures that the
board is correctly recognized when connected to the PC.
1. Start the Windows operating system and insert the
CD-ROM
2. The installation software must open automatically. If it
does not, run the setup.exe file from the CD.
3. After installation is completed, power up the evaluation
board as described in the Power Supplies section. Plug the
AD5292 evaluation board into the PC using the USB cable
that is included in the box.
4. After the software detects the evaluation board, proceed
through any dialog boxes that appear to finalize the
installation.
RUNNING THE SOFTWARE
1. To r un the prog ram , click Start, All Programs, ADI,
AD5292 Eval Board, AD5292 Evaluation Board.
2. If the PC is not connected to the board via the USB port, a
message box advises you, as shown in Figure 1. Check the
cable between the PC and the board, and click Retry. If the
cable is connected, exit the program and try to reinstall it.
08257-002
7-003
Figure 2. Error Message
3. To uninstall the program, click Start, Control Panel, Add
or Remove Programs, AD5292.
The main window of the AD5292 evaluation board
software opens, as shown in Figure 3.
0825
Figure 3. AD5292 Evaluation Board Main Window