Datasheet

UG-397 Evaluation Board User Guide
Rev. 0 | Page 6 of 16
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The E VA L -AD5247DBZ evaluation kit includes evaluation
board software provided on a CD. The software is compatible
with Windows® XP, Windows Vista, and Windows 7 (both
32 bits and 64 bits).
Install the software before connecting the SDP board to the USB
port of the PC to ensure that the SDP board is recognized
when it is connected to the PC. To install the software, use
the following steps:
1. Start the Windows operating system and insert the CD.
2. The installation software opens automatically. If it does
not, run the setup.exe file from the CD.
3. After installation is completed, power up the evaluation
board as described in the Power Supplies section.
4. Connect the EVAL -AD5247DBZ and EVA L-MB-LV-SDZ
into the SDP board and the SDP board into the PC using
the USB cable included in the evaluation kit.
5. When the software detects the evaluation board, follow the
instructions that appear to finalize the installation.
RUNNING THE SOFTWARE
To run the program, use the following steps:
1. Click Start > All Programs > Analog Devices > AD5247
> AD5247 Eval Board. To uninstall the program, click
Start > Control Panel > Add or Remove Programs >
AD5247 Eval Board.
2. If the SDP board is not connected to the USB port when
the software is launched, a connectivity error displays (see
Figure 5). Simply connect the evaluation board to the USB
port of the PC, wait a few seconds, click Rescan, and follow
the instructions.
10625-005
Figure 5. Pop-Up Window Error
The main window of the EVA L-AD5247DBZ evaluation
software then opens, as shown in Figure 6.
10625-006
Figure 6. EVAL-AD5247DBZ Evaluation Board Software Main Window