Datasheet

UG-350 EVAL-AD5233SDZ User Guide
Rev. 0 | Page 6 of 16
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The EVAL-AD5233SDZ evaluation kit includes evaluation
board software provided on a CD. The software is compatible
with Windows® XP, Windows Vista, and Windows 7 (both
32-bit and 64-bit).
Install the software before connecting the SDP-B boa
rd to the USB
po
rt of the PC to ensure that the SDP-B board is recognized
when it is connected to the PC.
1.
Start the Windows operating system and insert the CD.
2.
The installation software opens automatically. If it does
not, run the
setup.exe file from the CD.
3.
After installation is completed, power up the evaluation
board as described in the Power Supplies section.
4.
Plug the EVAL-AD5233SDZ into the SDP-B board and the
SDP-B board into the PC using the USB cable included in
the box.
5.
When the software detects the evaluation board, follow the
instructions that appear to finalize the installation.
To uninstall the program, click
Start > Control Panel > Add or
Remove Programs
> AD5233 Eval Board.
RUNNING THE SOFTWARE
To run the evaluation board software, do the following:
1.
Click Start > All Programs > Analog Devices > AD5233
>
AD5233 Eval Board.
2.
If the SDP-B board is not connected to the USB port when
the software is launched, a connectivity error is displayed
(see Figure 10). Connect the evaluation board to the USB
port of the PC, wait a few seconds, click
Rescan, and follow
the instructions.
10368-010
Figure 10. Pop-Up Window Error
The main window of the EVAL-AD5233SDZ software then
opens, as shown in Figure 11.
10368-011
Figure 11. EVAL-AD5233SDZ Software Main Window