Datasheet

UG-348 EVAL-AD5162SDZ User Guide
Rev. 0 | Page 6 of 16
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The EVA L-AD5162SDZ evaluation kit includes evaluation
board software provided on a CD. The software is compatible
with Windows® XP, Windows Vista, and Windows 7 (both
32 bits and 64 bits).
Install the software before connecting the SDP-B board to the USB
port of the PC to ensure that the SDP-B board is recognized
when it is connected to the PC.
1. Start the Windows operating system and insert the CD.
2. The installation software opens automatically. If it does
not, run the setup.exe file from the CD.
3. After installation is completed, power up the evaluation
board as described in the Power Supplies section.
4. Connect the EVA L -AD5162SDZ to the SDP-B board and the
SDP-B board to the PC using the USB cable included in the
evaluation kit.
5. When the software detects the evaluation board, follow the
instructions that appear to finalize the installation.
To uninstall the program, click Start > Control Panel >
Add or Remove Programs > AD5162 Eval Board.
RUNNING THE SOFTWARE
To run the program, do the following:
1. Click Start > All Programs > Analog Devices > AD5162 >
AD5162 Eval Board.
2. If the SDP-B board is not connected to the USB port when
the software is launched, a connectivity error displays (see
Figure 6). Simply connect the evaluation board to the USB
port of the PC, wait a few seconds, click Rescan, and follow
the instructions.
Figure 6. Pop-Up Window Error
The main window of the EVAL -AD5162SDZ evaluation
software then opens, as shown in Figure 7.
Figure 7. EVAL-AD5162SDZ Evaluation Board Software Main Window
10366-009
10366-010