Datasheet

UG-365 AD2S1200/AD2S1205 User Guide
Rev. D | Page 8 of 24
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The E VA L -AD2S1200/05SDZ kit includes software on a CD.
Click the setup.exe file from the CD to run the install. The
default location for the software is
C:\Program Files\Analog Devices\AD2S1200_05\
Install the evaluation software before connecting the evaluation
board and E VA L -SDP-CB1Z board to the USB port of the PC to
ensure that the evaluation system is correctly recognized when
connected to the PC.
There are two parts to the installation:
• EVA L-AD2S1200/05SDZ board software installation
• EVA L-SDP-CB1Z system demonstration platform board
drivers installation
Follow Step 1 to Step 5 (see Figure 3 to Figure 7) to install the
EVA L-AD2S1200/05SDZ software. Follow Step 6 to Step 9 (see
Figure 8 to Figure 11) to install the E VA L -SDP-CB1Z drivers.
Proceed through all of the installation steps, allowing the
software and drivers to be placed in the appropriate locations.
Connect the EVA L -SDP-CB1Z board to the PC only after the
software and drivers have been installed.
Figure 3. EVAL-AD2S1200/05SDZ Installation—User Account Control
1. Click Ye s to begin the installation process.
Figure 4. EVAL-AD2S1200/05SDZ Installation—Destination Directory
2. Select the installation directory. Click Next.
Figure 5. EVAL-AD2S1200/05SDZ Installation—License Agreement
3. Click I accept the License Agreement, and click Next.
10442-003
10442-004
10442-005