Data Sheet

UG-866 EV-RADAR-MMIC2 User Guide
Rev. B | Page 8 of 28
ADF5901 CONTROLS
The ADF5901 Controls tab controls the ADF5901 device
settings (see Figure 4).
Use the RF Settings pane to control the output frequency. Type
the desired output frequency, in MHz, in the VCO Frequency
field.
To the right of the RF Settings pane, general options are
available for the registers of the ADF5901, including calibration
control and register readback.
When the device initially powers up, click Initialize ADF5901 to
perform the initialization sequence as described in the ADF5901
data sheet.
Following the initialization sequence, the device powers up and
all the ADF5901 blocks calibrate.
13410-004
Figure 4. ADF5901 Controls
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.