Data Sheet

UG-866 EV-RADAR-MMIC2 User Guide
Rev. B | Page 6 of 28
EVALUATION BOARD SOFTWARE
The control software for the EV-RADAR-MMIC2 accompanies
the EV-RADAR-MMIC2 on a CD. For the software installation
procedure, see the UG-476 user guide, PLL Software Installation
Guide.
To run the software, click the EV-RADAR-MMIC2 file on the
desktop or in the Start menu.
On the Select Device and Connection tab, select EV-RADAR-
MMIC2 (ADF5901, ADF5904, ADF4159) and click Connect.
Confirm that SDP connected displays at the bottom left of the
window on the status bar (see Figure 2). Otherwise, the software
has no connection to the evaluation board.
Note that, when connecting the evaluation board, it takes about
5 sec to 10 sec for the status label to change.
13410-002
Figure 2. Select Device and Connection Tab
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.