Datasheet

UG-105 Evaluation Board User Guide
Rev. B | Page 6 of 16
2. Click Update Driver in the properties window (see
Figure 8).
08892-008
Figure 8. Unknown Device Properties
3. On the Update Driver Software dialog box, choose
Browse my computer for driver software.
4. Browse to C:\Program Files\Analog Devices\ADF4360.
5. Click OK or Next.
6. If prompted by Windows security, choose Install this
driver software anyway.
7. If the installation is successful, the message in Figure 9
appears.
08892-009
Figure 9. Successful Installation
WINDOWS 7 (64-BIT) OS
Windows 7 64-bit uses a different driver than 32-bit systems. To
install this driver:
1. Disconnect the USB evaluation board.
2. Open ADF4360_setup.msi.
3. The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
4. Connect your USB evaluation board. The driver should be
found automatically.
Note that installing this driver package disables older versions
of Analog Devices PLL software; therefore, only install if needed.