Datasheet

Evaluation Board User Guide UG-104
Rev. B | Page 5 of 16
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
The control software and USB drivers for EV-ADF4360-7EB1Z
accompany the EV-ADF4360-7EB1Z on a CD. To install the
software, use the following steps:
1. Open ADF4360_setup.msi.
2. The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
The software requires Microsoft’s .NET Framework Version 2.0
or later to be installed on your machine. The installer automati-
cally downloads the framework from the Microsoft website if
you do not have this installed. If you do not have an Internet
connection or have a slow connection on the PC, then you
can install the .NET framework directly from the CD. Do
this by double-clicking dotnetfx.exe. Once installed, run
the ADF4360_Setup.msi again.
WINDOWS XP OS
Once you have installed the software, install the USB drivers.
To do so, use the following steps:
1. Plug in a USB cable to the USB connector on the
evaluation board. The Found New Hardware box
appears. See Figure 5.
2. Choose Install from a list or specified location
(Advanced).
08891-105
Figure 5. New Hardware Wizard
3. Click Continue Anyway when asked about Windows Logo
testing.
4. If the install was successful, the message box in Figure 6
appears.
08891-006
Figure 6. Successful Install