Datasheet

Evaluation Board User Guide UG-103
Rev. A | Page 5 of 12
WINDOWS VISTA OS AND WINDOWS 7 (32-BIT) OS
For Windows Vista or Windows 7 (32-bit), if the device drivers
do not install automatically, you will have to manually install
the drivers. To do so, use the following steps:
1. Find the new unknown device (the evaluation board)
in Device Manager and double-click it to open the
properties. The device should be Unknown device,
under Other devices (see Figure 5).
08889-005
Figure 5. Device Manager
2. Click Update Driver in the properties window (see
Figure 6).
08889-006
Figure 6. Unknown Device Properties
3. On the Update Driver Software dialog box, choose
Browse my computer for driver software.
4. Browse to C:\Program Files\Analog Devices\ADF4360.
5. Click OK or Next.
6. If prompted by Windows security, choose Install this
driver software anyway.
7. If the installation is successful, the message in Figure 7
appears.
08889-007
Figure 7. Successful Installation
WINDOWS 7 64-BIT OS
Windows 7 64-bit uses a different driver than 32-bit systems. To
install this driver:
1. Disconnect the USB evaluation board.
2. Open ADF4360_setup.msi.
3. The install wizard guides you through the installation
process. The software is installed in a default directory
called C:/Program Files/Analog Devices/ADF4360.
4. Connect your USB evaluation board. The driver should be
found automatically.
Note that installing this driver package disables older versions
of Analog Devices PLL software; therefore, only install if needed.