Datasheet

UG-103 Evaluation Board User Guide
Rev. A | Page 4 of 12
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
It is vital to install the software before connecting the board
to the PC. The control software and USB drivers for EVA L-
ADF4360-6EBZ1 accompany the EVA L-ADF4360-6EBZ1
on a CD. To install the software, use the following steps:
1. Open ADF4360_setup.msi.
2. The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
The software requires Microsoft’s .NET Framework Version 3.5
or later to be installed on your machine. The installer automati-
cally downloads the framework from the Microsoft website if you
do not have this installed. If you do not have an Internet connec-
tion or have a slow connection on the PC, you can install the
.NET Framework directly from the CD. Do this by double-clicking
dotnetfx.exe. Once installed, run ADF4360_Setup.msi again.
WINDOWS XP OS
After you have installed the software, install the USB drivers.
To do so, use the following steps:
1. Plug a USB cable into the USB connector on the evaluation
board. The Found New Hardware box opens. See Figure 3.
2. Choose Install from a list or specified location (Advanced).
08889-003
Figure 3. New Hardware Wizard
3. Click Continue Anyway when asked about Windows Logo
testing.
If the installation is successful, the message in Figure 4 appears.
08889-004
Figure 4. Successful Installation