Datasheet

Evaluation Board User Guide UG-171
Rev. B | Page 3 of 24
QUICK START GUIDE
Follow these steps to quickly evaluate the ADF4156 device:
1. Install the system development platform (SDP) drivers.
2. Install the Analog Devices ADF4153-4-6-7 software.
3. Connect the SDP-S motherboard to the PC and to the
EV-ADF4156SD1Z.
4. Follow the hardware driver installation procedure.
5. Connect the power supplies to banana connectors
(6 V to 12 V).
6. Run the ADF4153-4-6-7 software.
7. Select the SDP board and the ADF4156 device in the Select
Device and Connection tab of the software front panel
window.
8. Click the Main Controls tab. Update all registers.
9. Connect the spectrum analyzer to J2.
10. Measure the results.