Datasheet

Evaluation Board User Guide UG-405
Rev. 0 | Page 5 of 20
EVALUATION BOARD SOFTWARE
The control software for the EV-ADF41020EB1Z accompanies
the EV-ADF41020EB1Z on a CD. For the software installation
procedure, see UG-476.
To run the software, click the Int-N v7 file on the desktop or in
the Start menu.
On the Select Device and Connection tab, choose your device
and your connection method, and then click Connect.
Confirm that Analog Devices RFG.L Eval Board connected
is displayed at the bottom left of the window (see Figure 4).
Otherwise, the software has no connection to the evaluation board.
Note that, when connecting the board, it takes about 5 to 10
seconds for the status label to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
10675-018
Figure 4. Software Front Panel Display—Select Device and Connection