User manual

ADSP-BF538F EZ-KIT Lite Evaluation System Manual I-5
INDEX
SW6 (flash enable) switch, 1-10, 2-11
SW7 (audio enable) switch, 1-13, 2-12
SW8 (audio input) switch, 2-15
SW9 (reset) push button, 2-17
switches
See also switches by name (SWx)
diagram of locations, 2-9
synchronous dynamic random access memory,
See SDRAM
system
architecture, of this EZ-KIT Lite, 2-2
clock frequency, 1-9
clock (SCLKx) signals, 1-10, 2-5, 2-6
T
Target Options dialog box, 1-9
TFS0 signal, 2-13
TFS2 signal, 2-6
TFS3 signal, 2-6
timers connector (P11), 2-24
TMRCLK signal, 2-7
TSCLK0 signal, 2-13
TSCLK2 signal, 2-6
TSCLK3 signal, 2-6
TWI connector (P10), 2-24
TXDx (transmit data input) signals, 1-11, 2-6
U
UART
enable switch (SW4), 2-10
interface, 2-4, 2-8
loop jumper (JP9), 2-14
UART0 transmit/receive signals, 2-4
UART1 connector (P12), 2-25
universal asynchronous receiver transmitter, See
UART
USB
cable, 1-3
interface, 2-9, 2-23
monitor LED (ZLED3), 2-19
user LEDs (LED2-6), 2-19
V
very-long instruction word (VLIW), ix
VisualDSP++
environment, 1-5
online Help,
xix
voltage regulators, 2-2