User manual

ADSP-BF538F EZ-KIT Lite Evaluation System Manual 2-23

ADSP-BF538F EZ-KIT Lite Hardware Reference

JTAG Connector (ZP4)

The JTAG header is the connecting point for a JTAG in-circuit emulator

pod. When an emulator connects to the JTAG header, the USB debug

interface is disabled.

Pin 3 is missing to provide keying. Pin 3 in the mating connector

should have a plug.

When using an emulator with the EZ-KIT Lite board, follow the

connection instructions provided with the emulator.

SPORT0 and SPORT1 Connectors (P6 and P7)

The pinout of the P6 and P7 connectors can be found in “ADSP-BF538F

EZ-KIT Lite Schematic” on page B-1.

PPI Connector (P8)

The pinout of the P8 connector can be found in “ADSP-BF538F EZ-KIT

Lite Schematic” on page B-1.

Part Description Manufacturer Part Number

IDC header FCI 68737-434HLF

Mating Connector

IDC socket DIGI-KEY S4217-ND

Part Description Manufacturer Part Number

IDC header FCI 68737-440HLF

Mating Connector

IDC socket DIGI-KEY S4220-ND