User manual

ADSP-BF538F EZ-KIT Lite Evaluation System Manual 2-9
ADSP-BF538F EZ-KIT Lite Hardware Reference
JTAG Emulation Port
The JTAG emulation port allows an emulator to access the processor’s
internal and external memory through a 6-pin interface. The JTAG emu-
lation port of the processor connects also to the USB debugging interface.
When an emulator connects to the board at ZP4, the USB debugging
interface is disabled. See “JTAG Connector (ZP4)” on page 2-23 for more
information about the connector.
To learn more about available emulators, contact Analog Devices (see
“Processor Product Information”).
Jumper and Switch Settings
The jumper and switch locations are shown in Figure 2-2.
Figure 2-2. Jumper and Switch Locations